joeydplaza

Im in queens work in Bronx want to buy a scanner in the range of 1500' to work with my Benz all my older scanners stink aka snap on need autel where can I find one n. not a chinweese one American please

Plutoe

Hey Joey go to Coney Island and have a hot dog. I'll sell you a DAS Xentry(Part D mux) system for 1200, six bennies upfront!!

joeydplaza

what do u mean 600 up front .what do I get for 600. I found same system for 548.40 im not trying to insult u maybe I got it wrong please explain thanks

Plutoe

Not to worry, I get insulted every day, however if you can get a New DAS Xentry system, repeat system consisting of a Dell laptop, installed software, a Part D mux and cable set for 548.40 go for it----you got a deal and then you can take me off you Xmas card list!!

joeydplaza

ok now I get it it was not including the lab top. and I think the rest of the stuff u said. you got to excuse me im really computer dumb. im a old time mechanic trying to get back to the present. I work at a fleet service and really only work on crown victorias and sprinter diesel motors. got to get up to date. my company dosent buy any equipment everything in this shop belonges to me ive been here 28 years

igharabli

where can i buy the das xentry and wht cable do i need with it thx

Plutoe

Check the internet there are thousands of folks selling the diagnostic software and hardware!!

MagCL

THis is where I bought mine, works excellent.
http://www.obdii-diag.com/mb-star-c3-scanner-p-47.html

igharabli

thx for reply im gm tech but i love mercedes benz so im working on 07 s550 4matic i have problem with dr window wont go up or down? i check my power and grd at the module r ok but i realized the master switch work through data unfortunately snap on scanner wont access dr door module?so my ? can DAX XENTRY access the module and monitor the switch operation and can i do function test by getting the window up and down .and if the module appear to be bad and replaced with new one can DAX XENTRY program the module?

Plutoe

Yes, and that is why DAS Xentry can't read the GM software--- PS-- to day do not have to screw around with grounds bla bla----the software does all that for you!!---That's why you GM techs charge to many hours to do the same job!!

FYI If the issue is the door control module and if the module needs to be programed DAS Xentry will do that!!

igharabli

lol thx for ur info