Check oil level alert
#1
Junior Member
Thread Starter
Check oil level alert
So I changed my oil 7-3-2018 and just recently I keep getting the alert to check oil level when refueling. Every time I check the oil level is ok. It reads just a little over the full line. Is that why it's keeps alerting me cause it's barely over the full line? Or is there something else wrong? Any help would be greatly appreciated!
#3
Super Member
You can also read the oil level on the dash display. The vehicle engine should be warmed up and the vehicle sitting on a level surface. Turn the engine off, wait a minute or so to let the oil level stabilize then turn the key back to the on position without starting the engine. The rest of the procedure involves holding the trip reset /dimmer light button It's not a laboratory calibrated reading but I've found it to be close if your oil level detector is functioning correctly..
Some videos that show how to do it
Some videos that show how to do it
#4
Super Member
So I changed my oil 7-3-2018 and just recently I keep getting the alert to check oil level when refueling. Every time I check the oil level is ok. It reads just a little over the full line. Is that why it's keeps alerting me cause it's barely over the full line? Or is there something else wrong? Any help would be greatly appreciated!
Last edited by ot1; 10-07-2018 at 12:48 PM.
#5
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,067
Received 1,730 Likes
on
1,380 Posts
1922 Ford Model T / no OBD
x2 on overfill.