Airmatic level one side lower
#1
Newbie
Thread Starter
Airmatic level one side lower
Hi everybody, after replacing the shocks before, I have a difference in level between the left side and the right side after an automatic calibration with sd conect 5 succeeded.
Thanks
Thanks
#2
MBWorld Fanatic!
Join Date: Jan 2014
Location: Republic of Texas
Posts: 3,222
Received 929 Likes
on
721 Posts
'99 and '05 E55 AMG
SD connect 5 autocalibrates? Using an older system, I had to set it manually using an inclinometer on the front control arms and the rear axles. Absolutely level floor, front control arms equal to each other and between 3.1* to 4.1* (inboard higher than outboard) plus rear axles between -0.9* and -1.5* (outboard higher than inboard). Set inclination angles, ensure sensor voltage values within allowable range, confirm inclination angles, go to next screen, enter recorded inclination angles, press "calibrate".
Potential causes:
-car not absolutely level prior to calibration,
-front control arms not equal inclination angle,
-rear bolts were tightened in such a way that one side is binding,
-front control arm bolts tightened so that one side is binding.
Those are the ones off the top of my head.
Potential causes:
-car not absolutely level prior to calibration,
-front control arms not equal inclination angle,
-rear bolts were tightened in such a way that one side is binding,
-front control arm bolts tightened so that one side is binding.
Those are the ones off the top of my head.