P0546 Code
Thread Starter
Junior Member
Joined: Dec 2017
Posts: 36
Likes: 0
From: Connecticut
E320
P0546 Code
Ok guys. I plugged a cheap scan tool in that I borrowed from a friend. Code, P0546. Bank 1 sensor 1. This code happened after running down the highway at about 80ish for 10 minutes or so. Should I clear it run the car normal and see what happens? Car runs and sounds normal.
Member
Joined: Feb 2017
Posts: 248
Likes: 36
From: L.A., Moscow, NYC, San Diego, Baja
1998 E320 Wagon, 2003 W211 E500, 2003 W211 E500, 1999 W210 E55 AMG
Ok guys. I plugged a cheap scan tool in that I borrowed from a friend. Code, P0546. Bank 1 sensor 1. This code happened after running down the highway at about 80ish for 10 minutes or so. Should I clear it run the car normal and see what happens? Car runs and sounds normal.
Thread Starter
Junior Member
Joined: Dec 2017
Posts: 36
Likes: 0
From: Connecticut
E320
Reset the code. Drove it for 9 miles. Shut the car off, started it back up and the code was back. So it is time to change the sensor. First question, location? Is it upstream from the cat? Second question, any brand better than others? Thanks
MBWorld Fanatic!
Joined: Feb 2014
Posts: 6,189
Likes: 1,548
From: MA
2008 E350 4Matic, 2011 E350 4matic
Original is probably Bosch. I got some Walker ones on Rockauto for about $50 on clearance. Put them in a few months ago and they seem fine. Sensor 1 is usually upstream and 2 is downstream.
Thread Starter
Junior Member
Joined: Dec 2017
Posts: 36
Likes: 0
From: Connecticut
E320
Ok I am back to this damn code. I bought a icarsoft CR Pro. Wanted something to more than one car. Other than the generic code P0546. When I run the diagnostic I get 2660-001. Component B19/11 upstream of turbo. I changed the the EGT sensor upstream of the O2 sensors. What a pain to get to the wiring. Everything looked good. So where is component B19/11? Any help would be great.
Thread Starter
Junior Member
Joined: Dec 2017
Posts: 36
Likes: 0
From: Connecticut
E320
You guys here are the best. Not sure where you find the pictures. But I am thankful. Finding the correct part was a little painful but I will start the job soon. Part # 000-905-38-05-MBZ
Trending Topics
Thread Starter
Junior Member
Joined: Dec 2017
Posts: 36
Likes: 0
From: Connecticut
E320
All set car runs fine code clears. Lesson learned use a good code reader. Not sure why no one makes an aftermarket sensor for bank one. The one in the turbo housing. MB part shipped $100.
Thanks for all the help.
Thanks for all the help.
MB World Stories
The Best of Mercedes & AMG
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Mercedes Teases Updated EQS With Steer-By-Wire and a Yoke
Verdad Gallardo
8 Mercedes Models With Poor Reliability Records
Verdad Gallardo
Magnificent New Mercedes-Maybach S-Class Revealed: 12 Things to Know
Verdad Gallardo
Newbie
Joined: Mar 2022
Posts: 2
Likes: 0
Mercedes S320 w221
Hey guys, i also have the exact same code p0546. Whenever i erase it and then turn the car on and off twice it comes back. It has been like this for a while now, however i am not sure which sensor is it exactly (i am not really into repairing the car myself). Could you please send me a link or show me which sensor is it exactly so i can buy it here immediately and have it replaced? Also i have another question but it is out of topic... My center console speaker is the only one that works. Sometimes i would steer more suddenly and the front side speakers would start working too (from what i know, my amplifier must be replaced) but i repainted my car and since the repaint, only the center console speaker is working and it sounds awful like that. Could you advise me what should i do? I can get a second hand amplifier but will that fix the issue?
