When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
While replacing my intake manifold I noticed that the large vacuum line running from the port on the rear of the manifold near the throttle body up to the firewall on the passenger side was cracked. I made a temporary repair, but I'll have to replace this hose to avoid a vacuum leak. Does anyone have a part number for this hose, I can't seem to find anything online? I believe it's for the brake booster?
Hello!
Did you find out what the intake manifold valve / connector that connects to the hose in question do? Please see pictures below. Need to know it as I plan to test it, but not sure how. Thanks!
I sent the picture above of the vacuum hose connected to the brake booster right behind the intake manifold, I was trying to see if anybody knows how to take it out, I have been struggling with it for a while now
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
