2008 E550 Camshaft Position Sensor Code P0025
11-30-2022, 08:04 PM
#1
Newbie
Thread Starter
2008 E550 Camshaft Position Sensor Code P0025
2008 W211 E550
I have a DTC code P0025 that just popped up. I know that this is the Left (driver side) Camshaft Position Sensor or magnet as I see it also referred to.
The specific description I get is: "Continuous camshaft adjustment (left): incorrect outlet camshaft position (CMP) (P0025).
I can find loads of repair instructions for the V6 models. Can anyone provide me with instructions for replacing this on the V8?
I've read on the V6 there are two of these per side? Is that true for the V8?
Thanks in advance for your feedback.
I have a DTC code P0025 that just popped up. I know that this is the Left (driver side) Camshaft Position Sensor or magnet as I see it also referred to.
The specific description I get is: "Continuous camshaft adjustment (left): incorrect outlet camshaft position (CMP) (P0025).
I can find loads of repair instructions for the V6 models. Can anyone provide me with instructions for replacing this on the V8?
I've read on the V6 there are two of these per side? Is that true for the V8?
Thanks in advance for your feedback.
Last edited by bluemach1; 11-30-2022 at 08:16 PM.
11-30-2022, 10:31 PM
#2
MBWorld Fanatic!
Join Date: May 2021
Location: Tampa, FL
Posts: 2,023
Received 1,631 Likes
on
1,020 Posts
2008 E350 (W211 @170K), 2012 ML350 (W166 @119K), 2014 E350 Sport (W212 @96K), 2015 ML350 (W166 @92K)
https://www.fcpeuro.com/products/mer...515811#fitment
Kit implies removal of the oil cooler. Though some people get away doing it w/o removal of it.
Also, 4 total for the whole engine
Kit implies removal of the oil cooler. Though some people get away doing it w/o removal of it.
Also, 4 total for the whole engine
Last edited by juanmor40; 11-30-2022 at 11:05 PM.
12-01-2022, 12:11 PM
#3
Newbie
Thread Starter
https://www.fcpeuro.com/products/mer...515811#fitment
Kit implies removal of the oil cooler. Though some people get away doing it w/o removal of it.
Also, 4 total for the whole engine
Kit implies removal of the oil cooler. Though some people get away doing it w/o removal of it.
Also, 4 total for the whole engine
Am I to assume that all of the front accessories and this process are the same on the V8 (M273)?
12-01-2022, 12:48 PM
#4
MBWorld Fanatic!
Join Date: May 2021
Location: Tampa, FL
Posts: 2,023
Received 1,631 Likes
on
1,020 Posts
2008 E350 (W211 @170K), 2012 ML350 (W166 @119K), 2014 E350 Sport (W212 @96K), 2015 ML350 (W166 @92K)
Here is a document that should help with the V6 and V8 engines
12-01-2022, 02:09 PM
#5
Newbie
Thread Starter
Cool. Thank you. Even though this is for 212, this should still be common to the 211. It does appear that the front of the v6 and v8 are the same. Looks like this will be pretty straight forward.
The following users liked this post:
juanmor40 (12-01-2022)
