No movement
Out Of Control!!
Joined: Apr 2019
Posts: 12,163
Likes: 6,882
From: Silicon Valley
W212 MY'14 M276-3.5NA @75kMi
@BenzNinja forum sponsor can tell you how to rent Xentry unit without even buying it.
Inquire if they can help you remotely troubleshoot your tranny conductor...
🤞
Inquire if they can help you remotely troubleshoot your tranny conductor...
🤞
Out Of Control!!
Joined: Apr 2019
Posts: 12,163
Likes: 6,882
From: Silicon Valley
W212 MY'14 M276-3.5NA @75kMi
OEM tool
All right, now that you have an expert tool on hand, your next task is to learn enough to get your shaft to spin.
I have just now reread your thread and my understanding is that we concluded issue was intermal.
We considered what live data we could using Launch cReader. The Xentry is going to let you run a collection of factory tests like no other tool can You have the expert tool.
Concentrate on testing your conductor plate with Xentry.
Also test the tranny ISM shifter module data with engine running. This gets tranny out of P into D: just what you want to see.
I have just now reread your thread and my understanding is that we concluded issue was intermal.
We considered what live data we could using Launch cReader. The Xentry is going to let you run a collection of factory tests like no other tool can You have the expert tool.
Concentrate on testing your conductor plate with Xentry.
Also test the tranny ISM shifter module data with engine running. This gets tranny out of P into D: just what you want to see.
