car back from service, interesting notes.
They did the SBC brake recall software update, but they did not bleed the brakes..I dont know why, but apparently they chose not to as stated on the work order. Should this have been done and why do you think they chose not to?
They also told me there was a service bulletin on the rear ac not working correctly and blowing out hot air..so they fixed that as well..they replaced the shut off valve and heater core. (as mine was blowing out hot air when the ac was on using the rear 4zone.) I was roasting my rear passengers...
Lastly, my transmission was slipping into neutral as i mentioned in a prevoius post, they replaced the seals, and cut off locking tab - there was an internal leak that was causing the electronics to malfunction.
It seems these cars are full of gremlins...I must admit, John King at MB Manhattan is a great service advisor, he really goes the extra mile and he is the only thing that keeps me from getting angry..If you use MB Manhattan, he is great...
Campaign # 2004050014 OCT04
Programming SBC Hydraulic Unit
Models 211.065/070/076/082/083/026/265/283/282, 230.474/475/476
Model Years 2003 through 2005
211 – VIN; From A014562 to A586891, X097696 – X163060
230 – F001748 – F085469
211 – Up to VIN A279911, X102857 Bleed hydraulic braking system
Trending Topics
I had them do the Voice Control Module for my phone and the gromet for the water leak at the same time.
The Best of Mercedes & AMG


