Wiring Help- Trailer Lights
#1
Member
Thread Starter
Join Date: Feb 2016
Location: Palatine, IL
Posts: 86
Likes: 0
Received 23 Likes
on
19 Posts
2013 E350 4Matic
Wiring Help- Trailer Lights
Does anyone have any info about the wiring in the back of the tail lights?
I will be installing a PWM Taillight Converter to get 4-Way plug for the trailer electrical.
W212 uses one wire for the tail/ brake lights, one for the turn signal and than the last for the backup light.
There are 4 wires in the back of each tail light and I know that Brown is the ground. I need to know which one is the turn signal and then the combined tail/brake.
This is a PWM converter that does not draw power from the circuit so it will not damage any electronics , modules etc, it only monitors and then amplifies the output via direct connection to the battery.
I will be installing a PWM Taillight Converter to get 4-Way plug for the trailer electrical.
W212 uses one wire for the tail/ brake lights, one for the turn signal and than the last for the backup light.
There are 4 wires in the back of each tail light and I know that Brown is the ground. I need to know which one is the turn signal and then the combined tail/brake.
This is a PWM converter that does not draw power from the circuit so it will not damage any electronics , modules etc, it only monitors and then amplifies the output via direct connection to the battery.