Wheel fitment

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Oct 3, 2019 | 08:11 AM

Crni01

Thread Starter

Junior Member

Joined: Aug 2011

Posts: 33

Likes: 5

From: Croatia

C300CDI 4MATIC

Wheel fitment

Hello, i need your advice regarding wheel fitment for e 350 bluetec 4matic 2014. It s my friends car and he wants to change wheels so i dont want to advise him wrong

Wheels are Keskin KT 18
Front are 19,8.5,et45 with 245,35
Rears are 19,9.5, et45 with 275,30

Is these setup ok or will it stick out?

Does anybody have pictures with similar setup?

Oct 3, 2019 | 08:21 AM

RA72825

Banned

Joined: Oct 2005

Posts: 4,957

Likes: 1,640

I don’t see any issue with that setup. Stock ET is 45, so you should be good with no poke front or rear even with the wider 275 in the back. I’m running 285 in the rear on a 9.5x19 wheel with a 52 ET

Oct 3, 2019 | 09:57 AM

GuestFromTampa

Super Member

Joined: Oct 2012

Posts: 580

Likes: 17

From: SoFlo

W212 E250 BT 4M

It definitely will not stick out,
using different size tires on 4matic is a different story ))

Last edited by GuestFromTampa; Oct 3, 2019 at 10:01 AM.

Oct 3, 2019 | 10:05 AM

Crni01

Thread Starter

Junior Member

Joined: Aug 2011

Posts: 33

Likes: 5

From: Croatia

C300CDI 4MATIC

Diference in radius is 1% - 3.3 mm which is ok with Mercedes official wheel size permissible deviations

Oct 17, 2019 | 10:13 PM

Billyismyname

Super Member

Joined: Aug 2019

Posts: 594

Likes: 171

From: USA to Germany

W221/W222/W213/X290

Quote:

Originally Posted by Crni01

You will not have any problems. I’ve had 9”x19 ET 40 front and 10x19 ET 38 rear and did not rub. Make sure you get proper tires for it though. If it does rub a little you may want to roll your fenders as mine made a liiiiiitttle noise when going into corners and hitting a bump at the same time. Good luck!