will a catalytic from an e350 fit an e550?
04-19-2021, 10:47 PM
#1
Member
Thread Starter
will a catalytic from an e350 fit an e550?
The question was answered, thank you! Mods may remove
Last edited by alan_e550; 05-25-2021 at 10:17 AM.
04-20-2021, 01:56 AM
#2
MBWorld Fanatic!
Join Date: Feb 2014
Location: MA
Posts: 6,137
Received 1,499 Likes
on
1,171 Posts
2008 E350 4Matic, 2011 E350 4matic
A quick look at rockauto.com shows different part numbers for the E550 and E350. Also different numbers for 4matic and a base model which I assume would be the RWD ones.
The following 2 users liked this post by cetialpha5:
KEY08 (04-20-2021),
pierrejoliat (04-20-2021)
04-20-2021, 10:18 PM
#3
MBWorld Fanatic!
a 5.5L V8 is going to have bigger exhaust pipes, and a bigger cat, than a 3.5L V6, that should be obvious.
I would see if MagnaFlow makes a catalytic converter for your car. If you are in California, Colorado, New York, or Maine, do be sure to get the CARB approved model, I know MagnaFlow sells these for many other models.
ah, here's the CARB 2011 E550 4matic version, left or right, https://www.magnaflow.com/collection...alifornia=true
hmm, the Federal version is not yet available,
https://www.magnaflow.com/collection...tic-converters
I would see if MagnaFlow makes a catalytic converter for your car. If you are in California, Colorado, New York, or Maine, do be sure to get the CARB approved model, I know MagnaFlow sells these for many other models.
ah, here's the CARB 2011 E550 4matic version, left or right, https://www.magnaflow.com/collection...alifornia=true
hmm, the Federal version is not yet available,
https://www.magnaflow.com/collection...tic-converters
