Outside Mirror Lower Cover Removal Instructions Needed
#1
MBWorld Fanatic!
Thread Starter
Join Date: Oct 2002
Location: Cincinnati
Posts: 4,276
Received 1,001 Likes
on
733 Posts
2010 E350 4Matic
Outside Mirror Lower Cover Removal Instructions Needed
Broke my passenger mirror housing today backing out of the garage. Miraculously did not break the mirror. Already did that one before. Broke the lower upper and lower housing. The upper is probably salvageable but the lower is in pieces, Know how to remove the top cover and mirror but not the lower cover. Looks like I might need to remove a tiny outboard torx screw but not sure. Any instructions would be appreciated. Thanks
#2
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,435 Likes
on
3,152 Posts
'71 Pinto
See attachments.
The following 3 users liked this post by konigstiger:
#4
MBWorld Fanatic!
Thread Starter
Join Date: Oct 2002
Location: Cincinnati
Posts: 4,276
Received 1,001 Likes
on
733 Posts
2010 E350 4Matic
Removed and installed it today. It was somewhat difficult to install because the wire that goes to the puddle light didn't want to sit in a channel allocated to it. This resulted in it being impossible to get the cover in position to allow the inboard clips (C and B) to engage. After recognizing this I tried positioning the wire in channel and following up with engaging the inboard side first then the outside clip D which worked.
The following users liked this post:
pierrejoliat (03-11-2022)
#5
MBWorld Fanatic!
oops
Last edited by Senecat; 03-11-2022 at 05:02 PM.