AMI Port Doing My Head In!!!
#1
Member
Thread Starter
Join Date: Feb 2021
Location: Canberra ACT
Posts: 220
Received 122 Likes
on
64 Posts
2013 E350 Facelift (Japan Import) 2007 E350 Elegance Wagon, 2014 E350 Wagon facelift model Jap Model
AMI Port Doing My Head In!!!
Hey Guys,
I have been ripping my hair out with this bloody AMI port in the centre console!
I have installed a new 10" Android touchscreen unit and i cannot get any sound into the NTG via the AMI port in the centre console!
I have checked that Aux is enabled in System and in the Engineering Mode.
Benzninja also enabled the Aux when he was making some changes to the coding of the car a wile ago.
I have plugged a headset into the Audio out port on the Android unit and its 100% putting out sound,
I have replaced the AMI port adaptor cable and still no sound.
I'm on the verge of ripping it out and pissing away almost a grand so I can put the car back together and drive it again.
My NTG is a Japanese version but the menus all look the same and are in English
Is there any diagrams of the back of these NTGs that show where the AMI port connects to the rear of the NTG?
Has anyone else ever struck this issue?
I have been ripping my hair out with this bloody AMI port in the centre console!
I have installed a new 10" Android touchscreen unit and i cannot get any sound into the NTG via the AMI port in the centre console!
I have checked that Aux is enabled in System and in the Engineering Mode.
Benzninja also enabled the Aux when he was making some changes to the coding of the car a wile ago.
I have plugged a headset into the Audio out port on the Android unit and its 100% putting out sound,
I have replaced the AMI port adaptor cable and still no sound.
I'm on the verge of ripping it out and pissing away almost a grand so I can put the car back together and drive it again.
My NTG is a Japanese version but the menus all look the same and are in English
Is there any diagrams of the back of these NTGs that show where the AMI port connects to the rear of the NTG?
Has anyone else ever struck this issue?
The following users liked this post:
biker349 (08-26-2022)
#2
Member
Thread Starter
Join Date: Feb 2021
Location: Canberra ACT
Posts: 220
Received 122 Likes
on
64 Posts
2013 E350 Facelift (Japan Import) 2007 E350 Elegance Wagon, 2014 E350 Wagon facelift model Jap Model
Does anyone know which of these connections is the AMI Port?
These are pics I pinched off Ebay
This unit is the same as mine.
These are pics I pinched off Ebay
This unit is the same as mine.
Last edited by Aussie_E350_Wag; 08-26-2022 at 03:12 AM.
The following users liked this post:
biker349 (08-26-2022)
#3
Hello mate, I know this is an old thread but did you ever work this out?
I’m about to try and do the same thing on a Japanese A180 W176 with NTG 4.5.
I’m a bit worried I’ll run into issues seeing as it’s an import.
Thank you.
I’m about to try and do the same thing on a Japanese A180 W176 with NTG 4.5.
I’m a bit worried I’ll run into issues seeing as it’s an import.
Thank you.