E-Class (W212) 2010 - 2016: E 350, E 550

Workshop code

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-12-2022, 10:15 PM
  #1  
HVF
Junior Member
Thread Starter
 
HVF's Avatar
 
Join Date: Aug 2007
Posts: 62
Likes: 0
Received 1 Like on 1 Post
95 e320 Wagon, 98 s320 LWB
Workshop code

I changed the oil in my 2011 W212 and reset the service info. When I did that I noticed a workshop code. I have not seen workshop codes before .
The code is B3, then workshop code 3609. I don't understand the workshop codes and can't seem to find any listing for
them or how do I find the issue. I'm not getting any OBDII errors.

Thanks in advance for any help.
Harvey


Old 10-13-2022, 12:05 PM
  #2  
Out Of Control!!
 
konigstiger's Avatar
 
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,435 Likes on 3,152 Posts
'71 Pinto
Originally Posted by HVF
I don't understand the workshop code
Code generates vehicle-specific service sheet in MB WIS/MSS for tech. Cross reference services to attached sheet, mileage/time accrued.

Synthetic Motor Oil Replacement
Oil Filter Replacement
Cabin Dust/Combination Filter Replacement
Brake Fluid Exchange
All Fluid Level Checks & Corrections Are Dependent On Factory-Recommended Service Intervals For Your Vehicle's Year & Model.
Tire Inflation Check & Correction
Brake Component Inspection
Reset Maintenance Counter
Attached Files
File Type: pdf
11 E.pdf (162.9 KB, 192 views)
The following users liked this post:
pierrejoliat (10-13-2022)
Old 10-13-2022, 03:06 PM
  #3  
HVF
Junior Member
Thread Starter
 
HVF's Avatar
 
Join Date: Aug 2007
Posts: 62
Likes: 0
Received 1 Like on 1 Post
95 e320 Wagon, 98 s320 LWB
Originally Posted by konigstiger
Code generates vehicle-specific service sheet in MB WIS/MSS for tech. Cross reference services to attached sheet, mileage/time accrued.

Synthetic Motor Oil Replacement
Oil Filter Replacement
Cabin Dust/Combination Filter Replacement
Brake Fluid Exchange
All Fluid Level Checks & Corrections Are Dependent On Factory-Recommended Service Intervals For Your Vehicle's Year & Model.
Tire Inflation Check & Correction
Brake Component Inspection
Reset Maintenance Counter

Thank you for your help and the explanation. If I understand correctly you have listed the items that code refers to.
I have the WIS/MSS software so I guess somewhere in that software I can find the workshop code numbers and references. guess I will have to go hunting for it.
The service sheet in the PDF you sent does not reference the list of items needed, just a mileage and or time. when to do service. Or, maybe I'm confused (which certianly is a possibility).
Thank you again!

Harvey
Old 10-13-2022, 03:39 PM
  #4  
Out Of Control!!
 
konigstiger's Avatar
 
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,435 Likes on 3,152 Posts
'71 Pinto
'Cross reference' services to attached sheet using 'your' mileage/time accrued.
The following users liked this post:
pierrejoliat (10-13-2022)
Old 10-23-2022, 01:25 PM
  #5  
Super Member
 
MBENZTECH's Avatar
 
Join Date: Feb 2007
Location: Republic of Texas
Posts: 555
Received 238 Likes on 164 Posts
W203 W212 W211 R53MCS
Don't make the services difficult to understand. From 2006 and up all Mercedes vehicles require either a "B" or "A" every year or 10k miles. The "A" service is pretty much an oil change and service reminder reset along with vehicle inspection. The "B" service is the same as the "A" but add cabin air filter replacement and brake fluid service/flush. Every 50k miles along with whatever service is due at the time, you will need spark plugs and engine air filter replacement. Transmission service for the 722.9 is due every 50k miles or 70k miles for the 7g+. Mercedes Benz does not have any specific service for differentials but I would do them every 50k miles. I forgot to add clean the front sunroof drains every "B" service.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Workshop code



All times are GMT -4. The time now is 07:29 PM.