When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello everyone. I have a 2014 Mercedes E350 4 Matic. I had replaced my rear pads and rotors and the rear sensor on the passenger wheel. There is no sensor on the driver rear wheel. I hooked up the snap on code reader we have in the shop to clear codes. But the light still comes on. How do I turn it off? A google of it says it turns off automatically.
No reset necessary should go off automatically need to revisit install and there’s always the chance, although slim, of sensor being defective. See attachment.
Did you check front sensor.
W212 had pads sensors with dual wires, who provide closed circuit till it wears out open.
That means any bad connection in wiring will keep the light on.
Pretty easy to troubleshoot with jumper wire.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
