2013 E-350, Front Windshield Wiper Fuse
#1
Newbie
Thread Starter
Join Date: Jun 2023
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2013 E-300 Mercedes Bens
2013 E-350, Front Windshield Wiper Fuse
Please Help! My Windshield Wipers do not work. I suspect it is the fuse. However, I cannot locate that particular fuse.
I understand there are 2 or 3 locations, however I can't identify which one it is.
I understand there are 2 or 3 locations, however I can't identify which one it is.
#2
MBWorld Fanatic!
Join Date: May 2018
Location: Jakarta-Indonesia
Posts: 4,480
Received 4,553 Likes
on
2,666 Posts
2014 - W212.065 - E400 ( M276.820, 3 liter Turbo) RWD not Hybrid
In my car it is Fuse 10. It is located inside a box called Front SAM Fuse Box, inside engine bay.
If your car is a LEFT hand drive , this Front SAM is at the left side very close to the hood/bonnet hinge.
If your car is a LEFT hand drive , this Front SAM is at the left side very close to the hood/bonnet hinge.
The following 2 users liked this post by S-Prihadi:
CaliBenzDriver (06-30-2023),
pierrejoliat (07-01-2023)
#3
MBWorld Fanatic!
Join Date: Apr 2019
Location: Silicon Valley
Posts: 5,936
Received 3,652 Likes
on
2,429 Posts
MY'14 W212 M276 3.5NA @60kMi
Do wipers work in manual mode while driving?
It's known that opening the engine bonnet disables all wiper activities. Also note the dual hood sensors may fail with a bit of water intrusion inside the unprotected connectors.
Don't expect certainty without access to a scanner. Repair shops always discard most ct inputs anyways.
🙂
It's known that opening the engine bonnet disables all wiper activities. Also note the dual hood sensors may fail with a bit of water intrusion inside the unprotected connectors.
Don't expect certainty without access to a scanner. Repair shops always discard most ct inputs anyways.
🙂
The following users liked this post:
pierrejoliat (07-01-2023)