Multiple Electrical Problems 2014 E350 Facelift
The following users liked this post:
W212er (07-14-2024)
#102
Junior Member
Thread Starter
I just programmed it myself and its working now! It says the NAV is outdated but I think that I can update it with a few CDs. I was also able to fix the air conditioner issue by just taking off the flap motors testing them to make sure they work and then installing and calibrating them.
I wanted to thank everyone for your help!
I wanted to thank everyone for your help!
The following users liked this post:
juanmor40 (07-14-2024)
#103
MBWorld Fanatic!
Join Date: Apr 2019
Location: Silicon Valley
Posts: 5,761
Received 3,515 Likes
on
2,343 Posts
MY'14 W212 M276 3.5NA @60kMi
new used unit
I just programmed it myself and its working now! It says the NAV is outdated but I think that I can update it with a few CDs. I was also able to fix the air conditioner issue by just taking off the flap motors testing them to make sure they work and then installing and calibrating them.
I wanted to thank everyone for your help!
I wanted to thank everyone for your help!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
It's strange you had no issue with mismatched VIN or the wrong immobilizer PIN?
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
The following users liked this post:
W212er (07-14-2024)
#104
Junior Member
Thread Starter
The following 2 users liked this post by W212er:
CaliBenzDriver (07-14-2024),
juanmor40 (07-14-2024)
#105
Member
Can you share more detail here please as to the procedure to program it and how you got the PIN
Did you manage to swap out the HDD for the SSD ?
Did you manage to swap out the HDD for the SSD ?
#106
Junior Member
Thread Starter
I got the pin off of ebay (Mercedes Anti Theft Code COMAND W176 W212 W246 W216 W172 W204 W221 W207 W231 | eBay) I also saw there was another forum where a guy was offering to give out the code for free but he didn't respond this week, so I decided to buy it off that guy. All I had to do was send him the S/N for the new unit and he replied with the code. From there I used Vediamo 4 with passthrough and followed this video (