Help airmatic, suspension calibration with launch x431x
Thread Starter
Junior Member
Joined: Mar 2018
Posts: 57
Likes: 17
From: Dallas
14 E350 wagon
Help airmatic, suspension calibration with launch x431x
I tried calibrating my suspension today with the launch I noticed one side was sitting lower than the other and now I’m unable lift the vehicle. It’s only lowering it. if anyone has any knowledge, on fixing this problem, please help
Last edited by CLKx430; Jun 17, 2024 at 04:55 PM. Reason: Error
Out Of Control!!
Joined: Apr 2019
Posts: 11,964
Likes: 6,806
From: Silicon Valley
W212 MY'14 M276-3.5NA @75kMi
Your 4M was lower on one side. After calibrating it's now unable to lift at all.
Have a look at the ride height sensors data this may help understand why compressor is not activated.
You may not be able to calibrate through the pre-existing issue you had.
Attempt to calibrate did not succeed at fixing what was wrong...
bags
sensors
valve
compressor
module
relay
Happy testing...
Last edited by CaliBenzDriver; Jun 17, 2024 at 08:49 PM.
fixed
