Hello.
new to this Forum.
Im into a ongoing process of rebuild my 2014 S212. I have always had some bucket/motorsports seats in my cars, except this one, so wondering if the AMG seats would fit into a W/S212, from a W176/W177 ex.?

Wires for heat and airbag is a easy fix. But more the physic part, with fitting the rails, into the bottom of the car, im curious about.

Thanks!

Mechanical slider/rail yada yada aside, you will need ( if possible ) to add or remove the capability difference between the original seat "new-bucket" seat.
Example if the new-bucket seat headrest is not adjustable up/down, that means it has less 1 actuator and position sensor aka missing hardware..
Missing signal will cause soft DTC

Anything is possible as long as you can re-program modules or gateway.

Thanks!
i was thinking to get the manual seats. My car has no memory seats, only electric back-adjustment and air adjustable sides.

With the manual seats, i think i would be very easy to connect, IF the underneath of the seats fits, or Can be moved over from my old.

I was interested in doing this in my 2012 E250 (W212). If there’s any possibility of this working I’d look into doing it myself