Official W213 Picture Thread




Carbon fiber look diffuser and black chrome pipes inside on Luxury/Exclusive model
Carbon fiber look diffuser and black chrome pipes inside on Luxury/Exclusive model
[img alt="Carbon fiber look diffuser and black chrome pipes inside on Luxury/Exclusive model
"]https://cimg8.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1124/img_0730_aa20c453ba2f0388ab0d07ab204ff1ffac8135b2. jpeg[/img]
Carbon fiber look diffuser and black chrome pipes inside on Luxury/Exclusive model




I would definitely recommend professional installation, I tried and wasn’t successful because the rear bumper has to be removed for installation. I was able to remove the existing diffuser and exhaust pipes, however due to the larger exhaust pipes and their larger rear intake, insulation without removing the rear bumper is virtually impossible.
Getting ready to change the entire front as well so will post photos in a couple months once completed




I would definitely recommend professional installation, I tried and wasn’t successful because the rear bumper has to be removed for installation. I was able to remove the existing diffuser and exhaust pipes, however due to the larger exhaust pipes and their larger rear intake, insulation without removing the rear bumper is virtually impossible.
Getting ready to change the entire front as well so will post photos in a couple months once completed




It’s a refurbished OEM front burner sprayed in the color of my car (paid to have that done). All other parts and components are aftermarket.
Last edited by kingscorpian27; Mar 26, 2025 at 06:29 AM.
Because there were no instructions included it involved lots of trial and error but overall it was not too difficult once I figured out the right order to install the parts. I have not mounted the diffusor part of the diffusor because I need to get some glue to attach the parking sensors to it. I'll post more pics when its done.
Stock setup
Fresh from China.
Almost done.
The exhaust tips say AMG like those on my E55 but with the diffusor installed its not really visible so I guess I am only a partial poser.
Last edited by illest; Apr 6, 2025 at 07:09 PM.




Because there were no instructions included it involved lots of trial and error but overall it was not too difficult once I figured out the right order to install the parts. I have not mounted the diffusor part of the diffusor because I need to get some glue to attach the parking sensors to it. I'll post more pics when its done.
Stock setup
Fresh from China.
Almost done.
The exhaust tips say AMG like those on my E55 but with the diffusor installed its not really visible so I guess I am only a partial poser.
Is there a specific glue required for the sensors? I will probably need to do the same once I swap the front bumpers.
Here are some pics of the fully installed diffusor, the car is super dirty but its April so there is no point in washing it.
I had to buy a 1 1/4 inch hole saw to cut the holes for the parking sensors. I am thinking about blacking out the silver part of the diffusor.
Last edited by illest; Apr 12, 2025 at 12:15 PM.




The Best of Mercedes & AMG




Years ago I purchased similar diffuser kit and returned it because the gloss black was too thin and flimsy, likewise silver didn’t match the other stainless steel/chrome trims. I rather the quad round tailpipes over the rectangle angled ones I have now. I would have also preferred chrome/stainless steel tailpipes instead of black stainless steel.
Unfortunately carbon fiber look alike diffuser isn’t available with stainless steel tailpipes for the Luxury model. I prefer the carbon fiber look alike diffuser over gloss black because the gloss black will get scratched and dirty easier, in my opinion and experience.
Years ago I purchased similar diffuser kit and returned it because the gloss black was too thin and flimsy, likewise silver didn’t match the other stainless steel/chrome trims. I rather the quad round tailpipes over the rectangle angled ones I have now. I would have also preferred chrome/stainless steel tailpipes instead of black stainless steel.
Unfortunately carbon fiber look alike diffuser isn’t available with stainless steel tailpipes for the Luxury model. I prefer the carbon fiber look alike diffuser over gloss black because the gloss black will get scratched and dirty easier, in my opinion and experience.




When I was shopping for the diffusor most of the ones I found had black rectangular tips and there were are few with the round black tips. Chrome was harder to find.
Last edited by illest; Apr 15, 2025 at 02:11 PM.
Rear 9.5 x 20 et 35 12mm spacer 275 30 20
I want to remove the spacer from the rear because the wheels poke out too much but I need to get some shorter lugs.
Also, the car is coated by Armour Lab - Iron Rocklear. If you ever wanted to know if this stuff is good.. trust me, Ceramic Coat can't even match it and this is from experience.
Last edited by Cosworth2000; May 29, 2025 at 12:17 PM.
https://cimg4.ibsrv.net/gimg/www.mbw...f07dde55c0.jpg
https://cimg5.ibsrv.net/gimg/www.mbw...50a19b9f5e.jpg
https://cimg8.ibsrv.net/gimg/www.mbw...0d726fef56.jpg
https://cimg9.ibsrv.net/gimg/www.mbw...6e228ce9ff.jpg
Also, the car is coated by Armour Lab - Iron Rocklear. If you ever wanted to know if this stuff is good.. trust me, Ceramic Coat can't even match it and this is from experience.






