w213 fuse diagram
#51
W213 E400 Window Switch
Hello,
I am new here, so I apologize if this is not the correct way to post/ask questions. I have a 2018 E400 Base coupe. A few weeks ago, my driver's side window switch stopped working. All of the labeled fuses look right. When I use the key fob or passenger side, everything works. I took it to the dealership, and they were nice enough to tell me I could order a new switch cheaply. They told me it was the switch. The switch has been installed, and no power is going to the switch; it never did; the dealership was wrong and never tested the power. The window fuses seem to be higher voltage for the motors, which work.
I have traced everything back and can't find the lower voltage relay that connects to the switch. It looks like it would go to its own fuse, but I am stumped. Does anyone know which fuse controls the switch? Any help would be so appreciated.
I am new here, so I apologize if this is not the correct way to post/ask questions. I have a 2018 E400 Base coupe. A few weeks ago, my driver's side window switch stopped working. All of the labeled fuses look right. When I use the key fob or passenger side, everything works. I took it to the dealership, and they were nice enough to tell me I could order a new switch cheaply. They told me it was the switch. The switch has been installed, and no power is going to the switch; it never did; the dealership was wrong and never tested the power. The window fuses seem to be higher voltage for the motors, which work.
I have traced everything back and can't find the lower voltage relay that connects to the switch. It looks like it would go to its own fuse, but I am stumped. Does anyone know which fuse controls the switch? Any help would be so appreciated.
#53
#54
MBWorld Fanatic!
Join Date: Dec 2006
Location: Europe
Posts: 6,375
Received 295 Likes
on
247 Posts
223.168 & 213.012 & 906.633 & 214.005
The power windows switch group is powered by the door control unit, no separate fuse for that (fuse 203 as mentioned above for the door control unit) . What are you referring to with the "master switch"? The switch group should have 30t power (not always on), ground and LIN bus only for wiring.