JDPEClassUK

SpaceDesign

JDPEClassUK

Thanks

Egonvdv

honestly i can't remember anymore
if you save your settings under a user profile you should be ok

teksurv

2018 E400 Coupe, had 3.75 prior I believe.

Mbracer26

Cant get into this menu on my 2017, but on my 2019 loaner it enters. very interesting.

Egonvdv

you either have to select and hold "settings" or "car"
but now that i'm on 3.76 only "car" works

fizad99

My 2018 with P2 had version 01.70.01.00 and i just had it updated to 03.76.00.10. Anyone know what the differences are or what the update did? are their release notes anywhere?

Cao Black

Just went through the very same update. What does your Repair Order say, if anything? My update was done in response to Campaign 2018010008 (Diigital Owner's Manual may not meet production specs). My limited tech savy tells me that the first numbers represent major changes, and each 2 digits to the right of those represent less and less critical changes. Think of going from USB 01 to USB 03. Hard to believe that the only change was an update to the digital operators manual, so if you locate any release notes, please share them here.

rustybear3

To access dealer menu, it's important to go to "vehicle" and hold down Command button for 10 seconds to enter dealer mode. When finished accessing settings in dealer menu, scroll down to "End", click control knob again to exit dealer mode.

Egonvdv

one major change is that carplay works simultaneous now with rest of system
and you no longer have to connect your phone each time you want to stream from phone to car via bluetooth.
also system is MUCH faster.
new camera view for front tires (actually worse than before)
some changes in navigation system (easier to operate some functions)
I think that's about it.

fizad99

Hi Egonvdv.

Could you elaborate more on these two?

one major change is that carplay works simultaneous now with rest of system - i've used carplay before the update, didn't notice anything out of the ordinary?

and you no longer have to connect your phone each time you want to stream from phone to car via bluetooth- before the update, my phone would connect after like 10 seconds to the bluetooth...i didnt have to keep connecting my bluetooth. after the update i had to re-connect my phones bluetooth as it reset all my settings, now it's the same as it was.

suby01

Is 03.76.00.10 the latest COMAND version? Anyone that had an update in the last 30 days have a newer version?

Egonvdv

i gues it was because of my very old software
if carplay was on, nothing else was working (car's media, gps etc)
and i had to manuallyl connect phone evey time i wanted to stream (for calls was always conencted of course)

adriandries

I saw this post today, did anyone get the latest software?
He doesn't say what software version.

Egonvdv

that doesn't seem very official.
also 300 eur for just an ambi light upgrade is a bit steep no ?

adriandries

It's not official. They do all sorts of retrofits. But the software update is not for the ambi lights, it's for all the system.
I think that the new official version does that, that's why i asked here if someone has any updates or a recent software update
at the Mercedes dealer.

seedy

Mine is an early UK 2016 with the dual 12" display. Got mine updated yesterday as was having problems with maps/gps and its now 03.76.00.10.

Also for people who have dual screens, when my sunroof opened and the sun hit the left dual screen (nav screen) it used to go white (bleed) due to the heat. Anyway got that changed under warranty now its perfect as its a later version of screen! So if you have the same prob get it checked out

Mark Elliott

Hi I've just had my software updated to version 4.xxxx I can't recall the exact number I'll take a photo later.
I was on version 00.16.00.01 really old on my April 2016 registered car.

The software is broadly the same, slightly larger font, consumption graph looks nicer. Internal lights settings look different.

It is much faster than my original version.

But android auto is still not using full screen ☹.
And now buttons like media and navi don't work with android auto.

suby01

I scheduled an oil change for my E300 Luxury and I added a note also to updated the COMAND and man navigation version. Dealer replied back saying that it was done at the last service....which was 12 months ago. I think we had 2 version updates come up since then. A little frustrating as to the dealer has to come back and seems sort of like fighting me on it. Clearly they can run the VIN see what version they updated it to, and then also run a check on the current version. And then potentially come back. Oh youre in luck we have an update ready. We will see what they say as the service day comes.

SpaceDesign

Thats very frustrating. As you can read earlier in this tread, I got the run around, and was told it was done! when it clearly wasn't. After a whole load of bull about needing codes from Germany to update the software, they eventually took it back for a few hours and did it.

I finally went from Version 0.61 to 03.76.00 in March. Thanks to Egonvdv's advice. System boots faster on start up, runs faster all the time, and the enhancements to graphics, icons, fonts, are well worth it. The Navigation also tells me now the upcoming next junction and manoeuvre required. Plenty of other improvements, and I haven't found any problems to date. Just push them and tell them you are having major problems with the navigation freezing....

baadmon

Yes, I too just had my system updated today. Some noticeable changes that took away some of the annoying portions of some of the menu options and screens. One noticeable annoying change is the extension of both the top and bottom information bars across the entire screen. This has totally changed the integrity of the look of the screen as it has made the small nav screen much smaller...

On another note, I did notice a change to the interior ambient light setting menu, but it has not introduced the multi-color setting for my car which is a 17 E300. I wish they would have, that definitely is a solid option to have. Hopefully soon...

suby01

BumP.
Anyone have any new updates for the Navigation and or COMAND?
In April we were at 3.76 and V14.

JDPEClassUK

I am now on version 15 through online update

suby01

As of 5/18. Thats right I had my update done at the dealer and map is at V15 and Software version COMAND is 3.76.