Keyless Entry Retrofit - 2 Front Door are not working
I've just retrofit the keyless entry for w213 2019 with 4 door option.
I've done following.
- Installed 4 door handle
- Install 2 antenna at left/right rear door
- I've replaced new fob batterry
- Remark: I've existing antena for keyless go at center console and trunk.
Now, The keyless entry is working only for 2 rear door. 2 front door are not.
I've diagnostic with Xentry. There is no error code exist for KG module. It's seem all hardware are detected.
Below is my coding parameter. With above info. What I'm doing miss? Could somebody advise?
Thank you in advanced



