Mark this thread as Unsold
HPS Gen1 Supercharger(full rebuild/port/polished)
07-21-2009, 08:49 AM
#1
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
HPS Gen1 Supercharger(full rebuild/port/polished)
Complete Gen1 kit from a 98' C43 pictured below. The MP90 blower has about 100 miles on a full rebuild with port and polish from stiegemeier performance. $615 job.
Kit has been removed from the car, cleaned, and all parts bagged and labled, plus the original installation CD. Twin nozzle snowperformance meth/H20 kit available also.
Kit includes:
All brackets and hardware, hose clamps, etc.
2 serp belts
Larger idler pullies from BilletFlow
Rebuilt, Port/Polished blower
SplitSecond MAF clamp
Vortech FMU unit
Necesarry vac.lines and hoses.
Coolant tank with relocating bracket.
$3000.00
Meth/H20 kit includes:complete)
Extra tubing
Fuse taps
4 nozzle sizes(uses two)
Plated hardware with quick connect fittings
Solinoid
Pump
MAF based controller
Res.Tank with mounting bracket
$400.00
Blower work:
[IMG]
[/IMG]
Installed kit:
[IMG]
[/IMG]
Kit has been removed from the car, cleaned, and all parts bagged and labled, plus the original installation CD. Twin nozzle snowperformance meth/H20 kit available also.
Kit includes:
All brackets and hardware, hose clamps, etc.
2 serp belts
Larger idler pullies from BilletFlow
Rebuilt, Port/Polished blower
SplitSecond MAF clamp
Vortech FMU unit
Necesarry vac.lines and hoses.
Coolant tank with relocating bracket.
$3000.00
Meth/H20 kit includes:complete)
Extra tubing
Fuse taps
4 nozzle sizes(uses two)
Plated hardware with quick connect fittings
Solinoid
Pump
MAF based controller
Res.Tank with mounting bracket
$400.00
Blower work:
[IMG]
[/IMG]Installed kit:
[IMG]
[/IMG]
