Mark this thread as Unsold
Stef's aluminum fabbed oil catch can
05-28-2011, 08:32 AM
#1
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
Stef's aluminum fabbed oil catch can
Ran as a open system at the end of a crankcase pump evac system venting to atmoshere. Threaded drain plug at bottom, 10AN side fitting, 10AN top fitting. The filter can be removed and a fitting can be used to set it up as a closed system as many here use. Much nicer than the ebay one's.
$60.00 shipped. Most likely throwing in the anodized 10AN-5/8 push lock fitting in picture and the top fitting if I can find it, another 10AN-5/8 but 90 degree.
$60.00 shipped. Most likely throwing in the anodized 10AN-5/8 push lock fitting in picture and the top fitting if I can find it, another 10AN-5/8 but 90 degree.
