Mark this thread as Unsold
FS: 82mm TB and Flange - Cost Effecitve way for a 82mm setup
#26
MBWorld Fanatic!
Join Date: Oct 2009
Location: Southern California
Posts: 2,825
Likes: 0
Received 16 Likes
on
11 Posts
E55 w/ goods, Z32 Project underway
Pretty much an easy mod. Either welding it yourself or finding someone competent being the most difficult step. Should offer to sell just the bracket alone w/o the TB.
#28
Former Vendor of MBWorld
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 293 Likes
on
242 Posts
2003 W211 E55, 2003 W220 S600
Why send me a PM now? I asked you a simple question that you could have answered here in the thread and all would have been well but instead, you decided to act all sly and secretive. It's not like I didn't know it was one of the three different Bosch 82mm TBs available (of which only two will work with our cars). Everything about the two that do is posted here on the forum if you know where to look and the only reason I was going to buy one from you was to save me the time of getting the flange made. I wanted to know what the part number was so I knew for sure it wasn't the FD one I had purchased before and what pins, connectors, etc. I'd need to pick up by the time it was delivered but you kept up the BS answer game. So in the mean time, I had my own flanges cut and picked up a new throttle that even had the PN still intact. And while I had to have a couple flanges made and then tap them myself, I still managed to do it all for about the same price you were asking and maybe next time you'll be up front and honest with people when they ask you a question.
Last edited by Rock; 07-28-2012 at 08:45 AM.