Mark this thread as Unsold
FS: Smaller Supercharger Pulley for M113k
Thread Starter
Member
Joined: Sep 2012
Posts: 107
Likes: 0
From: Midwest
SL55 AMG
FS: Smaller Supercharger Pulley for M113k
I was going through my garage a found a pulley that I thought I had already sold. 
Anyway, I am selling my smaller supercharger pulley for the m113k motor.
It was only installed to test on the dyno when Eurocharged was building my motor...no real street time or use at all. You can contact John @ Eurocharged to verify if need be.
Same pulley as sold here for the m113k...
Smaller Supercharger Sale -
Excellent used/tested condition. Certainly in great shape with nothing wrong with it what so ever.
$350 plus shipping. Paypal only.
Thanks
Jack
84mm in size
1.5 to 2 psi increase (as compared to a stock supercharger pulley)
2.5lbs (one pound less than stock 3.5) ~28.5% reduction in weight
equates to 168-170mm crank pulley in power
requires the ECU to be tuned due to differences in AFR (a lot of tuners have tuned cars with this product)
Anyway, I am selling my smaller supercharger pulley for the m113k motor.
It was only installed to test on the dyno when Eurocharged was building my motor...no real street time or use at all. You can contact John @ Eurocharged to verify if need be.
Same pulley as sold here for the m113k...
Smaller Supercharger Sale -
Excellent used/tested condition. Certainly in great shape with nothing wrong with it what so ever.
$350 plus shipping. Paypal only.
Thanks
Jack
84mm in size
1.5 to 2 psi increase (as compared to a stock supercharger pulley)
2.5lbs (one pound less than stock 3.5) ~28.5% reduction in weight
equates to 168-170mm crank pulley in power
requires the ECU to be tuned due to differences in AFR (a lot of tuners have tuned cars with this product)
Last edited by pigskinplayers; May 15, 2014 at 04:27 PM.
Thread Starter
Member
Joined: Sep 2012
Posts: 107
Likes: 0
From: Midwest
SL55 AMG
