When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It seems a lot of people are mislead about the 82mm TB's and their fitment on the M113K motors.
ELECTRICALLY this is a plug and play unit that requires no pin swapping or modification to the wiring. However, no 82mm TB will bolt up to the M113K out of the box. The options are the following.
1.Use an adapter(bolt on or weld on) on the existing factory 74mm snout which then has to be ported to 82mm. In other words the supercharger has to come off.
2. Use an 80mm Supercharger snout, bore it to 2mm over, weld on extra material on the snout and relocate 2 mounting holes resulting in a factory-like flush mount of the TB
In addition to the above work a larger y-pipe elbow will also be needed.
With that being said, this listing is for THROTTLE BODY ONLY
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
