Mark this thread as Unsold
Finally W211 CF Quad Diffuser!!!!!!!
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Joined: Oct 2008
Posts: 27,901
Likes: 55
From: home
Lexus NX200T F-Sport AWD
installation guide from a member:
Take a plastic putty type knife or something plastic and start at the end of the df to get it started and have someone pull away the stock df as you jam that putty knife in to pry loose...That stock df is wafer thin btw.
We peeled off the stock DF then cleaned up the bumper and just double sided tape long runs at the top and bottom horizontally in the center portion of the DF and and 2 size 8x1 self drilling screws on the outer edges and 2 size 8x1 self drilling screws in between the tail pipe area. I also just today installed 6 - Size 10x3/4 self drilling metal screws...One at the top and bottom of each phin...I just laid down underneath the car and drilled them in.
Take a plastic putty type knife or something plastic and start at the end of the df to get it started and have someone pull away the stock df as you jam that putty knife in to pry loose...That stock df is wafer thin btw.
We peeled off the stock DF then cleaned up the bumper and just double sided tape long runs at the top and bottom horizontally in the center portion of the DF and and 2 size 8x1 self drilling screws on the outer edges and 2 size 8x1 self drilling screws in between the tail pipe area. I also just today installed 6 - Size 10x3/4 self drilling metal screws...One at the top and bottom of each phin...I just laid down underneath the car and drilled them in.
SPONSOR
Joined: Jul 2007
Posts: 5,459
Likes: 152
From: Houston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
Eurocharged Performance ML63 and TT lambo
Just ordered a diffuser!
Can't wait, and JBSPEED has been great answering questions and following up!
Can't wait, and JBSPEED has been great answering questions and following up!
