Mark this thread as Unsold
Finally W211 CF Quad Diffuser!!!!!!!
#212
installation guide from a member:
Take a plastic putty type knife or something plastic and start at the end of the df to get it started and have someone pull away the stock df as you jam that putty knife in to pry loose...That stock df is wafer thin btw.
We peeled off the stock DF then cleaned up the bumper and just double sided tape long runs at the top and bottom horizontally in the center portion of the DF and and 2 size 8x1 self drilling screws on the outer edges and 2 size 8x1 self drilling screws in between the tail pipe area. I also just today installed 6 - Size 10x3/4 self drilling metal screws...One at the top and bottom of each phin...I just laid down underneath the car and drilled them in.
Take a plastic putty type knife or something plastic and start at the end of the df to get it started and have someone pull away the stock df as you jam that putty knife in to pry loose...That stock df is wafer thin btw.
We peeled off the stock DF then cleaned up the bumper and just double sided tape long runs at the top and bottom horizontally in the center portion of the DF and and 2 size 8x1 self drilling screws on the outer edges and 2 size 8x1 self drilling screws in between the tail pipe area. I also just today installed 6 - Size 10x3/4 self drilling metal screws...One at the top and bottom of each phin...I just laid down underneath the car and drilled them in.