G55 Pulling to the left. Help!
After adjusting it drives straighter now but the steering wheel is still angled to the left if I let go of it. It still requires some correction to keep it straight.
I've read on the forums of many people having steering and alignment issues with all generations of G's but there doesn't seem to be any definitive answer for why its happening.
I suspect it may be a bent Panhard rod as some people have mentioned but those peoples cars pull right. My car is a Right Hand Drive vehicle. Would my car pull to the left if it were bent?
I tried looking up the part number A4633330301 as people have posted but I can't find this part anywhere nor can my local parts shops. Would anyone with a RHD G care to chime in on this?
Any other people succesfully able to get this truck driving straight?
Thank you,
Justin
gwagen2000 [at] comcast [dot] net
PS - The P/N for the LHD Front Panhard Rod is: A.463.330.07.07
PPS - The only alignment spec you can adjust is toe-in.
Last edited by DUTCH; Oct 7, 2015 at 10:43 AM.
I live in Atlanta and today I noticed I am aggressively pulling to the left. I was going to get it aligned but I think it might be more than just an alignment.
Any suggestions?
Thanks
The only alignment adjustment that can be done on a G is toe-in.
Truck has 91k miles
Trending Topics
If they hit something hard enough to damage a wheel or tire, it's entirely possible that they may have bent the transverse control arm on the front axle.
The Best of Mercedes & AMG






