Ok, I went with

Nitto Terra Grappler G2 Tire 275/55/20

I'll send pictures once they're mounted so you can see them. Thank you everyone for your input.

 

Very happy with this choice.

 

 

looks great. i am assuming no rubbing on full lock when turning? i did 285/50/20 with the same terra grappler tires. i was afraid it might rub and 285/50 is a little closer in size to the stock outer diameter.

 

No problem at all.

 

good to know we can upsize the tires quite a bit without major modifications. thanks !

 

Not sure if they have sizes that will fit but here are several potential options:

https://www.roadandtrack.com/car-cul...0Non%20Openers

 

I was going to order the Nitto Grappler G2 for my 2020 G550. I currently have the 20 inch wheels with the stock Pirelli 275/50/20 tires. Can I put on the 275/65/20 with no rubbing/issues with the stock suspension? I appreciate your help!

 

BIILW, how are those 305/55s treating you after driving on them some? Any rubbing?

 

I have had the mickey thompsons on for 6 months or so now, and besides the road noise because of the aggressive tread, not a single rub or problem. Like a beautiful wife or girlfriend, something that looks so awesome, you have to deal with a little of the cons that come with it.

If someone is looking for the factory 19" amg wheels from my 2017 g. I have them for sale at 1,000 for the set. Tires are half tread, and not a single curb scuff or mark on the wheels. I am in northeast pa.

 

I am running 305/50/20 Toyo AT3 on 20x10 Rotiform OZR

 

Hey Dot,
do you know what ET have the rotiform?
I'm into buying superturismo dakar 20x10 et 48 but is 35mm closer to the suspension. I currently have 20x8.5 et32 black AMG..

 

I'm actually running a lot lower than that. et15.

 

I'm new to this. what does ET mean ? Dotcom - is yours lifted or if I wanted to do something similar I buy the same size wheels and tires as you have ? Do you have more pictures or a side view ?

 

i am running rotiform Six-OR wheels... when my dealer checked, the OZRs didnt come in the 5x130 bolt pattern. did you get yours custom ordered or something ?

 

Mine are forged monoblock which were custom ordered. Takes around 6 weeks for production.

 

ah that explains a lot...those look great ! i love the design.
i was being cheap and ended up going the cast route because i wanted a set of wheels i can off road without worrying too much about damaging them.

 

I actually have another set on order so if you're interested in a great deal on these drop me a pm.

 

I am interested in the wheels. I'm new to these forums, not sure how to PM

 

beautiful choice. Do they come in different colors or its only black?

 

Do you have any rubbing/clearance issues with this set up?

 

I went with the new Nitto Recon Grapplers 33x12.5. Loving my new Formula Defender wheels and the aggressive stance.

 

Looks great! Do you have the aggressive sidewall tread pattern mounted out, or in? I haven't seen these tires in person yet, but was curious how different the sidewall detail was between the two sides.

 

I have the less aggressive sidewall showing (facing out). The more aggressive side was a bit much for my like, but the Nitto website has a 3d model that can give you a good idea.

 

Do these rub at full turn and what offset do those have