When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I found the G63 part number, its A463 421 1198 and a463 421 1298 for the right and left calipers respectively. Why don't you check it with the dealer and ask them to compare if there any description difference between the G and ML part numbers. Maybe it will give us a clue why the brackets do not fit.
........fantastic! I will check on this on Tuesday and report back. They searched by G63 vin number and it always cross referenced to the A166 part number. Very glad you found the G-wagon specific part numbers. I am also going to go ahead and just purchase new ones based on the G-wagon specific numbers you provided and compare them. Thanks
Hi mate I have checked the part number! The caliper cost around 600eur each. I am still not sure about the part. Cos it has a different disc than mine. I really don't know which is correct
Originally Posted by Ted Baldwin
........fantastic! I will check on this on Tuesday and report back. They searched by G63 vin number and it always cross referenced to the A166 part number. Very glad you found the G-wagon specific part numbers. I am also going to go ahead and just purchase new ones based on the G-wagon specific numbers you provided and compare them. Thanks
Ted
Last edited by kelvin12382003; 05-26-2013 at 07:59 AM.
Hi mate I have checked the part number! The caliper cost around 600eur each. I am still not sure about the part. Cos it has a different disc than mine. I really don't know which is correct
Which part number does not match your set, the caliper or disc? What is your part number for caliper or disc?
my part number are A4634210712 for the brake disc and A1664214198 for the caliper. however, the brake disc part number is different. therefore, I think the part number is for certain G, may be not for G63
Originally Posted by pagepro
Which part number does not match your set, the caliper or disc? What is your part number for caliper or disc?
We are also capable to design and make the needed adaptors so that you can utilize ML63 6-pot front calipers and mount to your G55/G500/G350 Bluetech. (Calipers can either be your own source or ordered from us - Brand new ones from MB dealer)
This is the same adaptor that we make for C63 owners upgrade to Black Series big rotors, and E63 owners upgrade to S63/S65 (from 360mm to 390mm)
Same as the adaptors (black anodized) in the bottom corner of this picture:
I stumbled across this thread, because I am looking for brake adapter brackets as well, and am wondering if anyone can help? I tried sending a message to racingbrake.com, but haven't heard back. I have a 2014 CLS 550 4matic, and would like to upgrade to front/rear CLS 63 calipers/rotors. Mercteil suggested CLS 63 steering knuckles and control arms to install with the brakes, but my shop mentioned that may make alignment tricky. Plus, I'd rather not add the knuckles/arms if I don't need to, and can get some adapter brackets instead. Any thoughts? Thanks!!!
Your request should be under your car forum. This is for G.
Since this is not a direct replacement so any request can only be responded upon our review of your existing set up vs. the intended upgrade; i.e. 2014 CLS 550 4matic to CLS 63 calipers/rotors as you have expressed.
Last edited by RacingBrake; 03-04-2016 at 08:06 PM.
RB BBK for CLS has since made this CLS customer very happy.
Originally Posted by CLS Custom
Hello Again,
My apologizes for not posting sooner; I have been extremely busy. I am overall extremely happy with the brake upgrade, both in the quality of the parts and in the added braking performance, but also in the professionalism of the company and staff! Win, win! This brake upgrade was exactly what the car needed! Stops on a dime!!! I look forward to doing business with RB again!!!
RB big brake kits are designed and made by a professional brake company with 30 years in brake business, and go well beyond the parts swap among available MB components.
Hi all
I have G55 2005
Just wanted to update everyone with another player on the market besides MCTEIL.
Just purchased this from company in Uk https://www.ebay.com/itm/AMG-Brake-C.../152807391752?
very reasonable . came with adapters for mounting the contact is Andrew ,very professional .
Hope someone had tried to install these