Removing paint on front bumper sensors
03-13-2012, 08:31 AM
#1
Newbie
Thread Starter
Join Date: Mar 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
W210
Removing paint on front bumper sensors
Hi,
My car model is W210.
Recently I got a paint job done on my front bumper due to a scratch. Before the paint job was done, the sensors are working perfectly. After the paint job, the sensors beeped (as in something is very close) all the time. I suspect that was caused by the paint job.
So my question is, how do I remove the paint? What should I use to remove it and what paint should I use to reapply the colour?
In the worst case scenario, what is the cost of replacing the front bumper sensors?
My car model is W210.
Recently I got a paint job done on my front bumper due to a scratch. Before the paint job was done, the sensors are working perfectly. After the paint job, the sensors beeped (as in something is very close) all the time. I suspect that was caused by the paint job.
So my question is, how do I remove the paint? What should I use to remove it and what paint should I use to reapply the colour?
In the worst case scenario, what is the cost of replacing the front bumper sensors?
03-27-2012, 12:52 PM
#2
MBWorld Fanatic!
I would take it back to the shop that did the paint job.
They most likely will have the right paint remover and this is part of the job you you paid for.
They most likely will have the right paint remover and this is part of the job you you paid for.
