Bluetooth not working
Thread Starter
Newbie
Joined: Mar 2007
Posts: 8
Likes: 0
Bluetooth not working
I have the puck and Verizon Razrs. The system has been wroking fine. Recently upon startup the ysytem cannot "locate" the phones and therefore does not work. I have unconnected and reconnected the puck with no change. Any suggestions?
MBWorld Fanatic!
Joined: Mar 2007
Posts: 1,653
Likes: 7
From: Central Pa.
2013 GL450 (traded for 2015 Escalade), 2012 Corvette, 2014 Ford Fusion, Previous: 2007 GL450, 2011
Have you tried working the other direction..........haveing the phone attempt to locate the vehicle? You will have to go to the bluetooth menu on the razr and work from there..........
Junior Member
Joined: May 2007
Posts: 46
Likes: 3
GL 450
Second, as the first writer suggested, initiate "headset" connection from the phone.
Once on my GL the phone Bluetooth hung and "crashed" Command on the GL - just froze it up. I had to turn off the car AND the phone to clear the jam. Long story short, I figured out it was the phone hanging, not Command.
Super Member
Joined: Jan 2007
Posts: 537
Likes: 2
From: Land of Magnolias and Mint Juleps
I had problems when the phone was not in the GL (or not turned on) when I started it. There is a ~30sec "window" when the GL will sync with the phone, and if the phone isn't in the car or turned on during that 30 seconds, they will not pair. After that time, and the phone is in the car and on, push the "TEL" button to pair them.
This may not be your problem, but it caused me some concern because my other cars will sync at any time, not just the first 30 seconds.
This may not be your problem, but it caused me some concern because my other cars will sync at any time, not just the first 30 seconds.
