Combination Filter DIY?
08-28-2008, 11:48 AM
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: New Jersey
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
2007 GL 320 CDI, 2005 M3, 2006 A3
Combination Filter DIY?
Time to do the Service B on a GL320.
Does anyone know where the combination filter (part number A 164 830 00 52, part of the ventilation system) is located and how hard it is to remove it?
Thanks.
Does anyone know where the combination filter (part number A 164 830 00 52, part of the ventilation system) is located and how hard it is to remove it?
Thanks.
09-01-2008, 06:46 AM
#2
Junior Member
Thread Starter
Join Date: May 2007
Location: New Jersey
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
2007 GL 320 CDI, 2005 M3, 2006 A3
Turns out this is a very easy replacement. The combination filter is part of the HVAC system, and is located behind the glovebox. Simply remove the four Torx 15 screws that hold the glovebox in place (do not remove the screw holding the latch), and pull the glovebox down. The filter box cover slides to one side and comes off. Then just reach in and replace the filters (there are two filters that sit side by side).
It will take 10 minutes at most to do.
It will take 10 minutes at most to do.
