When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
replacing front bumper on 2015 GLA 250 sport package, need to install Collision prevention radar 000-905-28-04 with bracket and connect it ( has wire). need help with finding right location and where to connect wire
( cannot refer to the old bumper-it was gone)
any help will be appreciated
Hi, I'm also interested in this....
I'd like to add it to my GLA250 and wondering if it is a simple plug and play or if there is a bunch of special configuring in the computer that needs to be done.
2017 GLA 250, 2011 C63 P31 (p30 w/ lsd) (in repair), 2005 C230 Sport Eurocharged, 2003 C320~sold
Old thread but if someone still needs a pic.... this is without the AMG bumper. With the AMG bumper just has a smaller bracket to mount on the grilles. The wire routes to a clip on the passenger side (USA Spec) and slides onto it holding it in place. The clip is added to the bumper and was blue in my case. There is then the wire attached to the vehicle in front of the wheel well that attaches to the wire in the pic below at the right side of the bumper.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
location of collision prevention radar
