GLC 250 to AMG line exterior
03-18-2021, 06:31 PM
#1
Newbie
Thread Starter
Join Date: Mar 2021
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
GLC 250d
GLC 250 to AMG line exterior
Hello!
New user here, first time posting. I have a problem I was hoping y'all could help me with.
I have a 2018 GLC 250d which I'm trying to retrofit with an AMG line exterior package. I've started out here https://take.ms/Lrlqh and I've got here https://take.ms/WSVXO
The problem is missing a few parts. First up, I know I need two black (plastic) wind deflectors here https://take.ms/bAHJ5 but I can't find the part I need nor the code for it. Here's how it looks https://take.ms/yn2Jb (YouTube video screenshot) After studying ALL the diagrams for the front bumper I can say it's definitely NOT part of the bumper. Second, I think I need different slash guards because this is what's happening https://www.dropbox.com/s/i5mrdzkk13..._1957.MOV?dl=0 The lower side of the bumper isn't sitting flush against the splash guard as I know it should, and there's a 1-inch gap there.
If anyone could help me out or even point me in the right direction I would greatly appreciate it.
Thanks!
New user here, first time posting. I have a problem I was hoping y'all could help me with.
I have a 2018 GLC 250d which I'm trying to retrofit with an AMG line exterior package. I've started out here https://take.ms/Lrlqh and I've got here https://take.ms/WSVXO
The problem is missing a few parts. First up, I know I need two black (plastic) wind deflectors here https://take.ms/bAHJ5 but I can't find the part I need nor the code for it. Here's how it looks https://take.ms/yn2Jb (YouTube video screenshot) After studying ALL the diagrams for the front bumper I can say it's definitely NOT part of the bumper. Second, I think I need different slash guards because this is what's happening https://www.dropbox.com/s/i5mrdzkk13..._1957.MOV?dl=0 The lower side of the bumper isn't sitting flush against the splash guard as I know it should, and there's a 1-inch gap there.
If anyone could help me out or even point me in the right direction I would greatly appreciate it.
Thanks!
Last edited by adrianpako; 03-18-2021 at 06:34 PM.
03-27-2021, 05:26 PM
#2
Newbie
Join Date: Mar 2021
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2016 Mercedes GLC 250d
Hello!
New user here, first time posting. I have a problem I was hoping y'all could help me with.
I have a 2018 GLC 250d which I'm trying to retrofit with an AMG line exterior package. I've started out here https://take.ms/Lrlqh and I've got here https://take.ms/WSVXO
The problem is missing a few parts. First up, I know I need two black (plastic) wind deflectors here https://take.ms/bAHJ5 but I can't find the part I need nor the code for it. Here's how it looks https://take.ms/yn2Jb (YouTube video screenshot) After studying ALL the diagrams for the front bumper I can say it's definitely NOT part of the bumper. Second, I think I need different slash guards because this is what's happening https://www.dropbox.com/s/i5mrdzkk13..._1957.MOV?dl=0 The lower side of the bumper isn't sitting flush against the splash guard as I know it should, and there's a 1-inch gap there.
If anyone could help me out or even point me in the right direction I would greatly appreciate it.
Thanks!
New user here, first time posting. I have a problem I was hoping y'all could help me with.
I have a 2018 GLC 250d which I'm trying to retrofit with an AMG line exterior package. I've started out here https://take.ms/Lrlqh and I've got here https://take.ms/WSVXO
The problem is missing a few parts. First up, I know I need two black (plastic) wind deflectors here https://take.ms/bAHJ5 but I can't find the part I need nor the code for it. Here's how it looks https://take.ms/yn2Jb (YouTube video screenshot) After studying ALL the diagrams for the front bumper I can say it's definitely NOT part of the bumper. Second, I think I need different slash guards because this is what's happening https://www.dropbox.com/s/i5mrdzkk13..._1957.MOV?dl=0 The lower side of the bumper isn't sitting flush against the splash guard as I know it should, and there's a 1-inch gap there.
If anyone could help me out or even point me in the right direction I would greatly appreciate it.
Thanks!
Hi, I done the same retrofit recently. The plastic parts you need are Air Duct part number A2538853100 and A2538853200 I brought mines off fixparts-online.com
04-09-2021, 11:42 AM
#3
Newbie
Join Date: Oct 2017
Location: Perth WA
Posts: 7
Received 0 Likes
on
0 Posts
W204 C63 2009 and X253 250D 2015
Hi @adrianpako and @Zahirul Islam Is it possible to get the 2 balck fins for the left and right air ducts only? I'd like to add them to mine if they are stable and easy to fit? If you know I'd appreciate the advice.
