"Swap" front bumper (AMG line) - problem
Thread Starter
Newbie
Joined: Sep 2022
Posts: 4
Likes: 0
GLC
"Swap" front bumper (AMG line) - problem
Hi everyone
I have a GLC 2019 (after FL). I wanted to replace the front bumper with the AMG line version. As in the link below:
https://www.carousell.sg/p/mercedes-...per-1220076410
I bought a complete bumper with parking sensors but they don't work.
4 sensors are the same as in the old bumper and 2 (internal) are different. Just these 2 show the distance correctly, and the other 4 show "obstacle in the road" even though there is none.
Do the sensors need to be calibrated somehow?
Any suggestions?
I contacted MB and they say that everything is set up correctly.
I have a GLC 2019 (after FL). I wanted to replace the front bumper with the AMG line version. As in the link below:
https://www.carousell.sg/p/mercedes-...per-1220076410
I bought a complete bumper with parking sensors but they don't work.
4 sensors are the same as in the old bumper and 2 (internal) are different. Just these 2 show the distance correctly, and the other 4 show "obstacle in the road" even though there is none.
Do the sensors need to be calibrated somehow?
Any suggestions?
I contacted MB and they say that everything is set up correctly.
Thread Starter
Newbie
Joined: Sep 2022
Posts: 4
Likes: 0
GLC
I'm sorry but I can't help. Coding was performed by the workshop (MercDiag) so try asking them (they speak English).
biuro@mercdiag.pl
biuro@mercdiag.pl
