Tyres
#3
Junior Member
I plan to go to Pirelli Scorpion Zeros before winter here. I have to get 10mm wider front/rears since they don't make the factory 21" size in most all seasons. Shouldn't be an issue as it's a pretty insignificant difference.
#6
Here's a couple, they just went on Wednesday so haven't taken anything good yet.
20x9 front, 20x11 rear. 275/40 and 315/35.
Tread width specs on the factory rear Goodyears was 9.4", these are 11.4"
20x9 front, 20x11 rear. 275/40 and 315/35.
Tread width specs on the factory rear Goodyears was 9.4", these are 11.4"
Last edited by scotchy; 01-08-2020 at 01:38 PM.
#8
Super Member
Hi,
For GLC43. This is what I replace it with. I have it for a month now. Very smooth and specially no crabbing sound while doing slow full turns. I'm happy with them. One size bigger than original.
The following users liked this post:
Rhino109 (08-10-2019)
The following users liked this post:
lanoipat (08-11-2019)
#14
FYI also for the REAR, I put 18mm spacers on thinking I could use the stock 45mm bolts on them but couldn't, had to get special bolts (Niche uses 27mm bolts) . Spacers aren't required but they looked tucked without them. (In the air the tires rubbed on the inner fender liners, on the ground they didn't but not much clearance)
If you go that route or any size spacer with the rears message me for more info.
M203209043+25 BD -Matte BLK20 x 9.5x112 66.50255.9001003-24MBS190032BALL0
M203201143+35 BD -Matte BLK20 x 11.5x112 66.50357.3001003-24MBS190032BALL0
http://www.nicheroadwheels.com/specs.cfm?id=10849
Edit...315's probably won't fit in the rear without a spacer.
I originally had stock 255/285's and they worked without spacers.
Last edited by scotchy; 08-14-2019 at 09:29 PM.