Howdy Folks,

I've been a member for ages but can't recall my login, as such just signed up again. Anyhow's I'm about to purchase a GLE63s 2018 Model from Sydney and the dealer just sent me some engine codes, then claimed it was for the aftermarket steering wheel that's fitted. (It has a Aftermarket steering wheel, with LED lights and what looks to be an LCD display apparently from Japan). I am looking for any info on these engine codes:

C01EB00 - There is an internal fault in control unit "N30/4 (Electronic Stability Program control unit)" - ESP - Electronic Stability prog ram (N30/4)
C015100 - There is an internal fault in control unit "N30/4 (Electronic Stability Program control unit)" - ESP - Electronic Stability prog ram (N30/4)
C015200 - There is an internal fault in control unit "N30/4 (Electronic Stability Program control unit)" - ESP - Electronic Stability prog ram (N30/4)
B21059A - The capacity of the starter battery is too low. The operating conditions for the component or the system are not satisfied - SAM - Signal Acquision And Actuation module (N10)

Greatly appreciate any more insight folks can share.

Any 63 it's expensive for repairs. Ask the dealer to install the original steering wheel and a new original battery.. Scan again and if the ESP still with Fault Codes, maybe some other mechanical stuff needs to be verified.

We can help you get the car back to stock