When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi there, I'm new to the forum and am just looking for the correct procedure for re torquing the front wheel hub bolt after replacement. I know when I removed it with my 1/2' impact it sure took some power, it must be torqued well over 200lbs??
Any info would be greatly appreciated.
thanks
No this one
[img alt="The centre one
"]https://cimg1.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x926/20241124_112518_a8844fa548190be693d5970c54df8f53a6 eb24b5.jpg[/img] The centre one
If it's like the pre-facelift (2010-12) models (and I'm pretty sure it is) you torque the axle nut to 88 foot/pounds (120Nm) and then rotate it another 90 degrees.
You mean the blue bolt, right?
For my 2014, probably the same as your 2015:
Stage 1 - 160Nm
Stage 2 - loosen (Just enough to take off the tension, maybe 1/4 turn)
Stage 3 - 120Nm
Stage 4 - 90 degrees
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
