Mark this thread as Unsold
FS: Custom CL203 Seat Brackets for Aftermarket Seats
11-26-2011, 05:59 PM
#1
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2005
Location: Calgary, Alberta
Posts: 1,497
Likes: 0
Received 2 Likes
on
2 Posts
2007 ML500
FS: Custom CL203 Seat Brackets for Aftermarket Seats
Up for grabs is a set of custom one-off seat brackets for a CL203. These are for installing bottom mount aftermarket seats. Included is the airbag sensor for the passenger side so there is no need to rip open your stock seat for this sensor.
Brackets and rails are from Bride and modified to fit CL203 only.
Selling as a complete set. If you're looking to install anything from Sparco, Recaro, etc into your CL203 and retain airbag funcationality then this is what you'll need.
Hardware is NOT included. Please source your own nuts and bolts depending on your aftermarket seat of choice.
There are seatbelt loops welded to the brackets. You will have to use the seatbelt receptacle from your original seats. You will also use the stock bolts to mount these brackets to the floor.
Paid over $1400 for this set up. Looking to get $300 before shipping for both brackets with rails and the airbag sensor.
Brackets and rails are from Bride and modified to fit CL203 only.
Selling as a complete set. If you're looking to install anything from Sparco, Recaro, etc into your CL203 and retain airbag funcationality then this is what you'll need.
Hardware is NOT included. Please source your own nuts and bolts depending on your aftermarket seat of choice.
There are seatbelt loops welded to the brackets. You will have to use the seatbelt receptacle from your original seats. You will also use the stock bolts to mount these brackets to the floor.
Paid over $1400 for this set up. Looking to get $300 before shipping for both brackets with rails and the airbag sensor.
Last edited by infected; 08-11-2014 at 02:14 PM.
Hit me up if you decide to sell the seat sensor on its own.
Trending Topics
01-05-2012, 01:03 PM
#12
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2005
Location: Calgary, Alberta
Posts: 1,497
Likes: 0
Received 2 Likes
on
2 Posts
2007 ML500
Sorry fellas, I know I may seem as indecisive as a housewife but I realize it is next to impossible to find a buyer for these. I've decided to keep the brackets and perhaps consider a new seat setup in 2012. 
