cabin filter install
#1
Out Of Control!!
Thread Starter
cabin filter install
Anyone else ever have difficulties with this? I am about to go MAD!!! I figured it was an easy drop and put the clip back in install? Am I missing something here? The original filter wont go back in either
Any help or words of wisdom would be greatly appreciated!!!
-Pete
Any help or words of wisdom would be greatly appreciated!!!
-Pete
#2
Super Member
Join Date: Dec 2001
Location: Northern California
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
MBs
Changing the filter the first time might take some time to find where the clips are located and how to remove them without breaking them. But after the first time it's fairly easy, just about 5 to 10 min or so....
http://www.whnet.com/4x4/cabinairfilter.html
http://www.whnet.com/4x4/cabinairfilter.html
#3
Senior Member
Join Date: Jul 2004
Location: New England
Posts: 260
Likes: 0
Received 2 Likes
on
2 Posts
1990 190E 2.6, ... 1998 ML320, 2005 ML500SE
The Filter is Directional.
Are you sure you installed the filter the correct way. There are two tabs, one on top and one on the bottom, and are offset so the filter will only seat in in one direction. The Filter medium should face the passenger door and the backing screen should face the drivers door.
Mike
Mike
Last edited by Mike's ML; 08-04-2005 at 04:51 PM.
#5
Out Of Control!!
Thread Starter
Originally Posted by Mike's ML
Are you sure you installed the filter the correct way. There are two tabs, one on top and one on the bottom, and are offset so the filter will only seat in in one direction. The Filter medium should face the passenger door and the backing screen should face the drivers door.
Mike
Mike
ML350 cabin filter is located under the glove compartment... drop the under dash and you should see a tab there... un clip it and it drops down
#7
Almost a Member!
Join Date: Jul 2005
Location: South Dakota
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
2001 ML320
Originally Posted by rmclos
I have an 2000 ML320 and was told it didn't have a cabin filter, is this true?
Can't hardly miss it after removing two very simple screws! Try it.