Headlight update!
#2
Almost a Member!
Join Date: Jul 2005
Location: South Dakota
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
2001 ML320
Yes it does, I have performed this updated and it is very easy. If you don't buy aftermarket ones with a pigtail adaptor, you need to rewire the new 02+ style headlight connector to work with your pre-02 ML.
#4
Almost a Member!
Join Date: Jul 2005
Location: South Dakota
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
2001 ML320
No it is not hard at all if you have any mechanical abilities at all.
You simply need to move two connectors around within the headlight harness.
Look at the attached picture to see what wires and what direction to move them.
You simply need to move two connectors around within the headlight harness.
Look at the attached picture to see what wires and what direction to move them.
#7
ihad a look at the plug as described great pick m8 i have awire allready in the 3rd sin down hole
finding it hard to relocate the pins and keep them in is there a knack to it i mightjust crimp them straight on but then friitghtend of water entry etc .
what happens to the fog light or i suppose lack of them
after these have been f
appriciate ur help fitted
many thanks paul
finding it hard to relocate the pins and keep them in is there a knack to it i mightjust crimp them straight on but then friitghtend of water entry etc .
what happens to the fog light or i suppose lack of them
after these have been f
appriciate ur help fitted
many thanks paul
Last edited by digio; 10-26-2005 at 05:16 PM.