** 22's Install on the ML! **
#1
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2002
Location: NYC/NJ.
Posts: 3,381
Likes: 0
Received 0 Likes
on
0 Posts
W209 - W163
** 22's Install on the ML! **
Well, got the 22's installed on Thursday in time for SEMA, however wasn't able to show because I had to be back in Jersey on Saturday. The wheels are 22x10" OZ Canyon STs with 285/35/22 Nitto 555 Extremes. The rims look huge in person, more like 24's. Got alot of compliments on them, i love them, and they are strong as hell too. Sorry for the crappy pics, took them before the sun went down. Enjoy! :clap:
Next Mod: Fender Flares and Auto-Couture Bodykit courtesy of D2-Autosport :drool:
Next Mod: Fender Flares and Auto-Couture Bodykit courtesy of D2-Autosport :drool:
#2
Looks awesome! What suspension are you running? I'm thinking of getting into an ML myself (can't stop staring at the '05 SpecEd in Pewter when I see one roll by) and would definitely like to get a set of wheels and maybe a moderate drop.
I've heard that lowering ML's only result in a very harsh ride quality--how has your experience been?
Can't wait for the bodykit...should look amazing!!!
PS-I've been a Bimmer guy myself for a while...I think I've seen you post on the BMW boards also?
I've heard that lowering ML's only result in a very harsh ride quality--how has your experience been?
Can't wait for the bodykit...should look amazing!!!
PS-I've been a Bimmer guy myself for a while...I think I've seen you post on the BMW boards also?
#3
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2002
Location: NYC/NJ.
Posts: 3,381
Likes: 0
Received 0 Likes
on
0 Posts
W209 - W163
Hey man, I'm also on E46 and Bimmerforums... same name.
I'm dropped on H&R Sport Springs... gave me a good 2 inch drop in the rear, manually dropped the front myself. I have a 3 finger gap between the fender and tire. The ride could be better, it is a little harsh over serious bumps, but overall I am happy, and surprisingly, with the new wheels, the ride improved. It's a good setup, no doubt.
I can't wait for the kit either, just need to get some cash. Auto-Couture isn't cheap.
I'm dropped on H&R Sport Springs... gave me a good 2 inch drop in the rear, manually dropped the front myself. I have a 3 finger gap between the fender and tire. The ride could be better, it is a little harsh over serious bumps, but overall I am happy, and surprisingly, with the new wheels, the ride improved. It's a good setup, no doubt.
I can't wait for the kit either, just need to get some cash. Auto-Couture isn't cheap.
#7
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2002
Location: NYC/NJ.
Posts: 3,381
Likes: 0
Received 0 Likes
on
0 Posts
W209 - W163
Originally Posted by kaze81
I like the way you mod the M-class. How did you lower it?
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2002
Location: NYC/NJ.
Posts: 3,381
Likes: 0
Received 0 Likes
on
0 Posts
W209 - W163
Originally Posted by jsloan01
WOW - that is a beautiful ML. Great work.
that thing has to turn a lot of heads.
that thing has to turn a lot of heads.
#10
Out Of Control!!
Vik its lookin good... glad to see Flairs are your next mod, I saw the wheels and said they need some flairs over em... then saw your post.
But please please please tell me that is not the front bumper your going to use?
Looks like a chrysler minivan dude...
But please please please tell me that is not the front bumper your going to use?
Looks like a chrysler minivan dude...
#13
Senior Member
Join Date: Feb 2005
Location: North Jersey
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
XLR
Originally Posted by PHML2K2ML320
Simply awesome ....now keep your eyes on the road for them dang POTHOLES!!!
LOOKIN CLEAN!!
#14
check engine light
Hello,
My 2000 ML 320 has a constant check engine light that came on.
It read error code po 170 self adapt. at limit(N3/10) and PO173 self adapt. at limit(N3/10)
I have clean the fuel injector system and the light went off for a couple of days and it came back on.
Any advise will be very much appreciated.
Thanks
AL
My 2000 ML 320 has a constant check engine light that came on.
It read error code po 170 self adapt. at limit(N3/10) and PO173 self adapt. at limit(N3/10)
I have clean the fuel injector system and the light went off for a couple of days and it came back on.
Any advise will be very much appreciated.
Thanks
AL
#15
MBWorld Fanatic!
Join Date: Jun 2003
Location: nj
Posts: 4,705
Likes: 0
Received 2 Likes
on
2 Posts
a car that can't do the throttle reset.
Originally Posted by alvinyap
Hello,
My 2000 ML 320 has a constant check engine light that came on.
It read error code po 170 self adapt. at limit(N3/10) and PO173 self adapt. at limit(N3/10)
I have clean the fuel injector system and the light went off for a couple of days and it came back on.
Any advise will be very much appreciated.
Thanks
AL
My 2000 ML 320 has a constant check engine light that came on.
It read error code po 170 self adapt. at limit(N3/10) and PO173 self adapt. at limit(N3/10)
I have clean the fuel injector system and the light went off for a couple of days and it came back on.
Any advise will be very much appreciated.
Thanks
AL
#21
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2002
Location: NYC/NJ.
Posts: 3,381
Likes: 0
Received 0 Likes
on
0 Posts
W209 - W163
Originally Posted by jojobos
I got same wheels too! harsh ride but I like the looks.
#22
Newbie
Join Date: Jul 2003
Location: Boston
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
2001 ML430
Thanks guys.
I cut the AMG tip and put magnaflow dual tips on my 430 w/sports package.
http://tinyurl.com/hu2oj
BTW vik, thanks for your suggestion on lowering. It came out very nice I think.
I cut the AMG tip and put magnaflow dual tips on my 430 w/sports package.
http://tinyurl.com/hu2oj
BTW vik, thanks for your suggestion on lowering. It came out very nice I think.
#24
Newbie
Join Date: Jul 2003
Location: Boston
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
2001 ML430
They were held by screws with loctite so you need a heatgun to melt them
down first. I removed them myself but a bodyshop filled holes and
made fiberglass strips (I belive) to cover the whole thing.
down first. I removed them myself but a bodyshop filled holes and
made fiberglass strips (I belive) to cover the whole thing.
Last edited by jojobos; 04-11-2006 at 12:19 AM.
#25
Nice looking rims ViK. harsh ride??? really? that kinda sucks. I'm trying to decide between aluminum or crome 22"s myself. Any advice, suggestions, personal preferences, whatever...? I got a dark blue ML 320, wondering if chrome would be too much.... I really like the look of the aluminum now that I see it, but thats a silver ML....hmmmm....
anyway, congrats brotha....
anyway, congrats brotha....