Door Panel Removal
#1
Member
Thread Starter
Join Date: Feb 2008
Location: Maryland
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
2000 ML55 (parted out), 92 1jz SC300, 92 Sentra (DD), 05 Cadillac SRX
Door Panel Removal
Okay so I have searched and what I have found is to take off the plastic trim around the door handle. Did that and supposed to be screws there...didn't see any. Next I started to try to pull off the clips around the bottom. That worked but it seems to be stuck all around the airbag and handle. Anyone know how to do this? I have to get it off to replace a regulator and a door lock actuator.
Thanks!!!
Thanks!!!
#3
Member
Thread Starter
Join Date: Feb 2008
Location: Maryland
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
2000 ML55 (parted out), 92 1jz SC300, 92 Sentra (DD), 05 Cadillac SRX
Thanks I will check under there and see if that is where the thing is being held on by. I took off the door handle plastic/wood and didn't see any screws underneath. Could the person who owned it before have taken them out and left them out? I am just trying to be sure that I don't damage anything.
Thanks for the help
Thanks for the help