ML320 - How do I get at brake bulb in tail light assembly?
#1
ML320 - How do I get at brake bulb in tail light assembly?
Hello.
I need to replace the brake light bulb in one of the 1999 ML320's tail light assemblies. I need some assistance in getting at the bulbs in the two tail light assemblies. How do I gain access to the inside back of the lamp assemblies in order to pull the bulb and socket out? I specifically need to access the assembly/bulb in the passenger side of the car. Also, does anyone know what bulb type/number it would be for the brake light bulb (is it a standard P21W)?
Thanks,
Walt
I need to replace the brake light bulb in one of the 1999 ML320's tail light assemblies. I need some assistance in getting at the bulbs in the two tail light assemblies. How do I gain access to the inside back of the lamp assemblies in order to pull the bulb and socket out? I specifically need to access the assembly/bulb in the passenger side of the car. Also, does anyone know what bulb type/number it would be for the brake light bulb (is it a standard P21W)?
Thanks,
Walt
#2
Senior Member
Join Date: May 2003
Location: In A Van Down By The River
Posts: 398
Likes: 0
Received 1 Like
on
1 Post
2014 RX 350 F Sport, 2007 Scion tC, 2000 ML 430 Money Pit Finally Gone! Oh Happy Day!
Hello.
I need to replace the brake light bulb in one of the 1999 ML320's tail light assemblies. I need some assistance in getting at the bulbs in the two tail light assemblies. How do I gain access to the inside back of the lamp assemblies in order to pull the bulb and socket out? I specifically need to access the assembly/bulb in the passenger side of the car. Also, does anyone know what bulb type/number it would be for the brake light bulb (is it a standard P21W)?
Thanks,
Walt
I need to replace the brake light bulb in one of the 1999 ML320's tail light assemblies. I need some assistance in getting at the bulbs in the two tail light assemblies. How do I gain access to the inside back of the lamp assemblies in order to pull the bulb and socket out? I specifically need to access the assembly/bulb in the passenger side of the car. Also, does anyone know what bulb type/number it would be for the brake light bulb (is it a standard P21W)?
Thanks,
Walt
#5
Senior Member
Join Date: May 2003
Location: In A Van Down By The River
Posts: 398
Likes: 0
Received 1 Like
on
1 Post
2014 RX 350 F Sport, 2007 Scion tC, 2000 ML 430 Money Pit Finally Gone! Oh Happy Day!
#7
One important tip: Be sure that you have taken the two (2) 10mm plastic nuts off AND that you have moved the slotted plastic tabs under those nuts off to the side BEFORE pulling backwards to release the "snap" lock. It's really easy to break those tabs, so take care.
TIP: A PLASTIC wedge used gently between the body and the lamp housing on the lower forward edge (where the snap lock is located) can help to ease a "stuck" snap lock. A bit of silicone before reassembly will make this easier if you have to do it again.
TIP: A PLASTIC wedge used gently between the body and the lamp housing on the lower forward edge (where the snap lock is located) can help to ease a "stuck" snap lock. A bit of silicone before reassembly will make this easier if you have to do it again.