"BAS/ESP" & "ETS" lamps
Thread Starter
Newbie
Joined: Sep 2007
Posts: 4
Likes: 0
ml320, 2001
"BAS/ESP" & "ETS" lamps
“BAS/ESP” lamp and “ETS” lamp remain illuminated after the power steering fluid “leakage” was fixed by changing all power steering hoses.
Can you give me any advices?
Thank you.
Can you give me any advices?
Thank you.
Junior Member
Joined: Aug 2008
Posts: 24
Likes: 0
From: Columbus, Ohio
ML320, ML350, E320
My lights light up occasionally also. I have had my ML320 tested and the computer isn't reading any trouble codes. I was told to swing by the dealership the next time they come on, but my schedule prevents me from doing so.
I have replaced 3 different switches this year and am not looking forward to replacing any more.
Let me know if you find out what the problem is.
I have replaced 3 different switches this year and am not looking forward to replacing any more.
Let me know if you find out what the problem is.
Member
Joined: Aug 2006
Posts: 79
Likes: 0
From: Atlanta, Georgia
G500-500E-ML500-NSX M3-M4-LP640-911C4S-S2000
My ML is doing the same thing. I was finally able to throw a code and it came back as:
Inlet Manifold Temp Sensor.
I do not know if this is related but I might start there. This part is about $400
Inlet Manifold Temp Sensor.
I do not know if this is related but I might start there. This part is about $400
