ML350 BAS light on after brake pressed
#1
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ML350 2003 / C250TD 97
ML350 BAS light on after brake pressed
Hi Guys...
Need some help please. My wife's ML350 2003 has developed a fault 5 days after extended warrenty has run out! Driving and all 3 lights on left hand side of consul came on(ESP/BAS/ETS/ABS). Sent vehicle to indie who replaced rear right abs sensor. Tested vehicle all lights went out..HooraYY!!!!! for 5 minutes everything was fine then went to re-start car and as soon as the brake was operated to put into drive the BAS light illuminated. Stop engine re-start and light goes out. Press brake and light comes on etc etc etc. Codes say BAS Travel sensor not operating. Can this be replaced or (hoping) does someone have a wiring diagram they could share with me...Please help as this is driving me nuts!!!! Thanks in advance
Need some help please. My wife's ML350 2003 has developed a fault 5 days after extended warrenty has run out! Driving and all 3 lights on left hand side of consul came on(ESP/BAS/ETS/ABS). Sent vehicle to indie who replaced rear right abs sensor. Tested vehicle all lights went out..HooraYY!!!!! for 5 minutes everything was fine then went to re-start car and as soon as the brake was operated to put into drive the BAS light illuminated. Stop engine re-start and light goes out. Press brake and light comes on etc etc etc. Codes say BAS Travel sensor not operating. Can this be replaced or (hoping) does someone have a wiring diagram they could share with me...Please help as this is driving me nuts!!!! Thanks in advance
#2
Super Member
Join Date: Mar 2006
Location: Waikele, Oahu, Hawaii
Posts: 769
Likes: 0
Received 6 Likes
on
6 Posts
2011 GLK350 P1, Multi-media & AMG Pkg; 2010 E350 w/ prem 2; 2018 4Runner SR5 Prem. 4x4
I got BAS/ESP light today....and my gear box was stuck in PARK. I had it towed to my friend's shop.
I notice the parking brake release seems loose, but still was able to release the parking brakes.
Anybody know what could be the culprit?
I notice the parking brake release seems loose, but still was able to release the parking brakes.
Anybody know what could be the culprit?
#3
Junior Member
Join Date: Aug 2008
Location: Columbus, Ohio
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
ML320, ML350, E320
For future reference, if your ML ever gets stuck in park again. Take a pen or pencil and insert it the little hole located at the bottom of the shifting column. This will allow you to get the car out of park.
#4
Super Member
Join Date: Mar 2006
Location: Waikele, Oahu, Hawaii
Posts: 769
Likes: 0
Received 6 Likes
on
6 Posts
2011 GLK350 P1, Multi-media & AMG Pkg; 2010 E350 w/ prem 2; 2018 4Runner SR5 Prem. 4x4
Thanks...I found that out after the car was towed...LOL...but I had AAA so towing was free.
Btw...it was the brake light switch at the pedal....simple DIY fix.
Btw...it was the brake light switch at the pedal....simple DIY fix.